2026-04-19T15:37:15Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/104792025-05-17T00:05:10Zcom_10259_6171com_10259_5086com_10259_2604col_10259_6172

Hurtado Alonso, Nerea Manso Morato, Javier Revilla Cuesta, Víctor Ortega López, Vanesa Skaf Revenga, Marta 2025-05-16T13:06:08Z 2025-05-16T13:06:08Z 2025-06 2772-3976 http://hdl.handle.net/10259/10479 10.1016/j.clema.2025.100317 The decommissioning of wind farms produces two primary waste materials: Recycled Concrete Aggregate (RCA) derived from the foundation concrete, and Raw-Crushed Wind-Turbine Blade (RCWTB) obtained through the crushing and sieving of the blades. Incorporating these materials into concrete enhances sustainability and, in some cases, improves mechanical properties while reducing the final environmental impact and cost compared to conventional concrete. A comprehensive characterization of the mechanical properties of concrete mixtures with varying RCA (0–100%) and RCWTB (0–10%) contents was conducted, these mixes being designed with increased water and admixture contents to compensate for the expected loss of workability caused by the addition of these waste materials. A Life-Cycle Assessment (LCA) and cost evaluation were also performed. The optimization of these mixtures was addressed using the Response Surface Method (RSM). The optimization process revealed that intermediate combinations of RCA (50%) and RCWTB (5%) yielded maximum flexural-tensile properties. However, achieving optimal performance proved more challenging when simultaneous optimization included compressive strength and deformability properties, such as modulus of elasticity and Poisson’s coefficient. For these properties, the optimal mix incorporated 88% RCA and 0% RCWTB. The RSM analysis demonstrated the feasibility of incorporating both RCA and RCWTB into concrete mixtures, mainly intended to work under bending stresses, but it also highlighted the complexities of achieving optimal performance when all mechanical properties were simultaneously considered. This research underscores the potential for these recycled materials to contribute to more sustainable concrete production while addressing the trade-offs in mechanical performance optimization. application/pdf eng Elsevier Cleaner Materials. 2025, V. 16, p. 100317 https://doi.org/10.1016/j.clema.2025.100317 Atribución-NoComercial 4.0 Internacional http://creativecommons.org/licenses/by-nc/4.0/ info:eu-repo/semantics/openAccess Recycled Concrete Aggregate Raw-crushed wind-turbine blades Concrete Response surface method Mechanical performance Global warming potential Cost Materiales de construcción Hormigón-Ensayos Ingeniería civil Building materials Concrete-Testing Civil engineering Optimization of concrete containing wind-turbine wastes following mechanical, environmental and economic indicators info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Cleaner Materials 16 100317