2026-06-30T05:20:21Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/73792023-03-23T11:10:18Zcom_10259_6171com_10259_5086com_10259_2604col_10259_6172

Revilla Cuesta, Víctor Skaf Revenga, Marta Santamaría, Amaia Romera, Jesús María Ortega López, Vanesa 2023-02-06T08:07:03Z 2023-02-06T08:07:03Z 2022-01 http://hdl.handle.net/10259/7379 10.1007/s43452-022-00382-z 1644-9665 The modulus of elasticity of a concrete depends on the elastic stifness of both the cementitious matrix and the aggregate–ITZ system, which includes any slippage mechanisms under loading between the aggregate and the cementitious matrix within the interfacial transition zone (ITZ). A procedure is presented in this paper to estimate the elastic stifness of an aggregate–ITZ system within a cementitious matrix, by considering the relative volumes and the porosities of the concrete components. The method was validated by determining the elastic stifness of both the limestone–ITZ and the electric arc furnace slag (EAFS)–ITZ systems when embedded in a slag-based cementitious matrix. The greater stifness of the EAFS–ITZ system in comparison with the natural aggregate system explained the higher strength and modulus of elasticity of the concrete following additions of EAFS. Moreover, having determined those parameters, the elastic moduli of concretes with a similar cementitious matrix could then be accurately estimated. eng http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess Atribución 4.0 Internacional Elastic stiffness Aggregate-ITZ system Concrete's modulus of elasticity Limestone aggregate Electric arc furnace slag Slag-based cementitious matrix Elastic stiffness estimation of aggregate–ITZ system of concrete through matrix porosity and volumetric considerations: explanation and exemplification info:eu-repo/semantics/article