Mostrar el registro sencillo del ítem

dc.contributor.advisorAlegre Calderón, Jesús Manuel 
dc.contributor.authorDíaz Portugal, Andrés 
dc.contributor.otherUniversidad de Burgos. Departamento de Ingeniería Civil
dc.date.accessioned2018-03-19T09:17:09Z
dc.date.available2018-03-19T09:17:09Z
dc.date.issued2017
dc.date.submitted2017
dc.identifier.urihttp://hdl.handle.net/10259/4750
dc.description.abstractEsta tesis presenta y discute la modelización de la difusión de hidrógeno en metales como un primer paso para predecir y mitigar la fractura asistida por hidrógeno. La fragilización por hidrógeno es un fenómeno mediante el cual se degradan los metales y las aleaciones, siendo habituales los fallos a industriales asociados a este hecho. Sin embargo, la relación entre el hidrógeno y la transición dúctil -frágil en el modo de fractura no está del todo clara. Por lo tanto, el presente trabajo tiene como objetivo establecer, validar, implementar y analizar un modelo numérico para simular la difusión de hidrógeno y la fragilización, en el marco de la Mecánica de los Medios Continuos y por medio de un software de Elementos Finitos. Además, se han reproducido ensayos de tracción de probetas entalladas en contacto con hidrógeno y se ha simulado la difusión de hidrógeno en depósitos almacenando H2 a presión.es
dc.description.abstractThis thesis presents and discusses hydrogen diffusion modelling as a first step in predicting and mitigating hydrogen-assisted fracture. Hydrogen embrittlement is a common phenomenon that degrades metals and alloys, and related failures are usual in industry. However, the relationship between hydrogen and the transition from ductile to brittle modes of fracture is not entirely clear. Therefore, the present work has the objective of establishing, validating, implementing and analysing a consistent numerical model for hydrogen diffusion, in a Continuum Mechanics framework by means of a Finite Element software. In addition, a notched tensile test is simulated, demonstrating that the combination of diffusion with damage models might predict brittle fracture. Vessels storing hydrogen are also simulated with the purpose of finding hydrogen distributions near stress concentrators; influence of cyclic loads and compressive residual stresses are also evaluated in these deposits.en
dc.description.sponsorshipMinistry of Economy and Competitiveness of Spain through grant MAT2014-58738-C3. Junta of Castile and Leon through project BU053U16 and pre-doctoral grant EDU/1006/2015.en
dc.format.mimetypeapplication/pdf
dc.language.isoenges
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjecthidrógenoes
dc.subjectdifusiónes
dc.subjectfragilizaciónes
dc.subjectfracturaes
dc.subjectelementos finitoses
dc.subjecthydrogenen
dc.subjectdiffusionen
dc.subjectembrittlementen
dc.subjectfractureen
dc.subjectfinite elementsen
dc.subject.otherResistencia de materialeses
dc.subject.otherEnsayos (Tecnología)es
dc.subject.otherStrength of materialsen
dc.subject.otherTestingen
dc.titleNumerical models for simulating hydrogen diffusion and embrittlement in high strength steelsen
dc.typeinfo:eu-repo/semantics/doctoralThesis
dc.rights.holderEste documento está sujeto a una licencia de uso Creative Commons, por la cual está permitido hacer copia, distribuir y comunicar públicamente la obra siempre que se cite al autor original y no se haga de él uso comercial ni obra derivadaes
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses
dc.identifier.doi10.36443/10259/4750
dc.subject.unesco2205.02 Mecánica de Medios Continuos
dc.subject.unesco2205.09 Mecánica de Sólidos
dc.subject.unesco2205.03 Elasticidad
dc.relation.projectIDinfo:eu-repo/grantAgreement/JCyL/BU053U16
dc.relation.projectIDinfo:eu-repo/grantAgreement/MINECO/MAT2014-58738-C3
dc.type.hasVersioninfo:eu-repo/semantics/acceptedVersion


Ficheros en este ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem