2026-11-03T00:56:05Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/38182024-07-18T09:40:35Zcom_10259_9433com_10259_5087com_10259_2728col_10259_9434

Iglesias García, Ángela Arcos Martínez, Julia Alonso Lomillo, Mª Asunción Universidad de Burgos. Departamento de Química The necessity of disposable biosensors for simple, rapid and inexpensive analysis in fields such as clinical, environmental or industrial has been highlighted over the past decade. In this way, screen-printed electrodes (SPEs) have been shown as inexpensive and reproducible devices for mass production of miniaturized biosensors [1-4]. These transducers, building by sequential layer deposition on the surface of ceramic or plastic substrates and curing steps, have been conventionally linked to the sensing element by adsorption, cross-linking, electropolymerization or covalent bonding. Bioelements are commonly immobilized after the printing and firing processes, because of the high temperatures reached during the curing step [5]. The immobilization procedure requires maintaining the initial properties of the enzyme intact. Thus, successful developments of biosensors largely rely on the cost and stability of the sensing elements [3]. Even if the above-mentioned immobilization procedures are efficient, they imply additional steps after fabrication of the screen-printed carbon electrodes (SPCEs), which extends the whole biosensor manufacturing. Screen-printing techniques also offer another attractive immobilization procedure consisting of printing the biological material. Enzymes, which are proteins able to catalyse specific chemical reactions in vivo, are by far the most commonly employed bioelements [1]. Enzymes can be integrated into the ink to form the sensing paste, which can be screen-printed resulting in biosensors fabricated by only one technology [6-8]. Undoubtedly, this immobilization procedure, which is known as automated immobilization, is particularly interesting for mass production of disposable biosensors. This work presents a simple way for preparing SPCEs modified with Horseradish peroxidase (HRP) for the determination of Levetiracetam (LEV). This second-generation antiepileptic drug (AEDs) has been previously determined using a SPCE-biosensor based on the immobilization of Horseradish peroxidase (HRP) by pyrrole electropolymerization [9] and covalent bonding [10] The screen-printing of HRP-containing ink (SPCHRPEs) offers a higher rapidity and simplicity in the manufacturing process of biosensors for LEV determination. 2015-08-27 2015-08-27 2014 info:eu-repo/semantics/bachelorThesis http://hdl.handle.net/10259/3818 spa http://creativecommons.org/licenses/by-nc-nd/4.0/ Este documento está sujeto a una licencia de uso Creative Commons, por la cual está permitido hacer copia, distribuir y comunicar públicamente la obra siempre que se cite al autor original y no se haga de él uso comercial ni obra derivada info:eu-repo/semantics/openAccess Attribution-NonCommercial-NoDerivatives 4.0 International