2026-04-27T14:05:26Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/43752022-12-19T12:19:58Zcom_10259_4268com_10259_5086com_10259_2604col_10259_4269

Bravo Cuesta, Andrés Gómez Gil, Francisco Javier Martín Fraile, Juan Vicente Ausín Rodríguez, Jesús Ruiz Calvo, Justo Peláez Vara, Jesús 2017-03-17T10:01:35Z 2017-03-17T10:01:35Z 2013-07 1996-1073 http://hdl.handle.net/10259/4375 10.3390/en6073373 The aim of this study was to propose and evaluate a very small wind turbine (VSWT) that competes with commercial grid-connected VSWTs in terms of simplicity, robustness and price. Its main components are a squirrel-cage induction generator (SCIG) driven by a frequency converter. The system has a direct-drive shaft, and may be constructed with commercial equipment. Simulation of the wind turbine effect is done with a motor. A control program regulates the variable-speed of rotation through three operational modes: (i) to drive the turbine to its optimum operation point; (ii) to limit its maximum rotational speed; and (iii) to limit the maximum power it generates. Two tests were performed, in order to evaluate the dynamic response of this system under variable wind speeds. The tests demonstrate that the system operates at the optimum operational point of the turbine, and within the set limits of maximum rotational speed and maximum generated power. The drop in performance in relation to its nominal value is about 75%, when operating at 50% of the nominal power. In summary, this VSWT with its proposed control program is feasible and reliable for operating direct-shaft grid-connected VSWTs. eng http://creativecommons.org/licenses/by/3.0/ info:eu-repo/semantics/openAccess Attribution 3.0 Unported very small wind turbine asynchronous generator asynchronous generator Feasibility of a Simple Small Wind Turbine with Variable-Speed Regulation Made of Commercial Components info:eu-repo/semantics/article