2026-05-05T03:53:10Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/56632021-11-02T12:04:42Zcom_10259_4201com_10259_5086com_10259_2604col_10259_4505

Martínez Pañeda, Emilio Cuesta Segura, Isidoro Iván Peñuelas, I. Díaz Portugal, Andrés Alegre Calderón, Jesús Manuel 2021-03-24T10:59:39Z 2021-03-24T10:59:39Z 2016-12 0167-8442 http://hdl.handle.net/10259/5663 10.1016/j.tafmec.2016.09.002 Ductile damage modeling within the Small Punch Test (SPT) is extensively investigated. The capabilities of the SPT to reliably estimate fracture and damage properties are thoroughly discussed and emphasis is placed on the use of notched specimens. First, different notch profiles are analyzed and constraint conditions quantified. The role of the notch shape is comprehensively examined from both triaxiality and notch fabrication perspectives. Afterwards, a methodology is presented to extract the micromechanical-based ductile damage parameters from the load-displacement curve of notched SPT samples. Furthermore, Gurson-Tvergaard-Needleman model predictions from a top-down approach are employed to gain insight into the mechanisms governing crack initiation and subsequent propagation in small punch experiments. An accurate assessment of micromechanical toughness parameters from the SPT is of tremendous relevance when little material is available. Ministry of Economy and Competitiveness of Spain through grant MAT2014-58738-C3 application/pdf eng Elsevier Theoretical and Applied Fracture Mechanics. 2016. V. 86, Part A, p. 51-60 https://doi.org/10.1016/j.tafmec.2016.09.002 info:eu-repo/grantAgreement/MINECO/MAT2014-58738-C3 Small Punch Test Fracture toughness Ductile damage Finite element method Resistencia de materiales Strength of materials Damage modeling in Small Punch Test specimens info:eu-repo/semantics/article info:eu-repo/semantics/submittedVersion info:eu-repo/semantics/openAccess Theoretical and Applied Fracture Mechanics 86 51 60