2026-06-20T12:26:15Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/72702024-05-14T10:39:48Zcom_10259_6231com_10259_4266com_10259.4_106com_10259_2604com_10259_4393com_10259_5086col_10259_6232col_10259_4394

00925njm 22002777a 4500 dc Guillán Lorenzo, Omar author Suárez García, Andrés author González Peña, David author García Fuente, Manuel author Granados López, Diego author 2022-09 Natural illumination has an important place in home automation applications. Among other advantages, it contributes to better visual health, energy savings, and lower CO2 emissions. Therefore, it is important to measure illuminance in the most accurate and cost-effective way. This work compares several low-cost commercial sensors (VEML 7700, TSL2591, and OPT3001) with a professional one (ML-020S-O), all of them installed outdoors. In addition, a platform based on the Internet of Things technology was designed and deployed as a centralized point of data collection and processing. Summer months have been chosen for the comparison. This is the most adverse situation for low-cost sensors since they are designed for indoor use, and their operating range is lower than the maximum reached by sunlight. The solar illuminance was recorded every minute. As expected, the obtained bias depends on the solar height. This can reach 60% in the worst circumstances, although most of the time, its value stays below 40%. The positive side lies in the good precision of the recordings. This systematic deviation makes it susceptible to mathematical correction. Therefore, the incorporation of more sensors and data that can help the global improvement of the precision and accuracy of this low-cost system is left as a future line of improvement. http://hdl.handle.net/10259/7270 10.3390/s22197107 1424-8220 Internet of Things (IoT) Luxometer Natural illumination Low-cost sensor A Low-Cost Luxometer Benchmark for Solar Illuminance Measurement System Based on the Internet of Things