2026-05-07T09:27:32Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/74992023-04-18T07:57:05Zcom_10259_4201com_10259_5086com_10259_2604col_10259_4505

Alegre Calderón, Jesús Manuel Cuesta Segura, Isidoro Iván Díaz Portugal, Andrés 2023-03-07T08:35:58Z 2023-03-07T08:35:58Z 2022-03 2452-3216 http://hdl.handle.net/10259/7499 10.1016/j.prostr.2022.03.083 Trabajo presentado en: The 7th International Conference on Crack Paths (CP 2021), organised by TC3 Fatigue of Engineering Materials and Structures of the European Structural Integrity Society (ESIS). The CP 2021 edition will take place in a virtual format (September 21st to 24th, 2021) The fatigue crack growth in round bars initiated from internal defects leads to the formation of a circular crack pattern usually so-called fish-eye. This failure mechanism is found in the current additive manufacturing techniques in which internal defects, such as pores or lack of fusion, are the main cause of fatigue crack initiation. Moreover, this fatigue mechanism becomes the predominant failure mode in the Very High Cycle Fatigue (VHCF) regime. With the aim of adequately studying these fatigue crack situations, this paper presents a set of solutions for the stress-intensity factor calculation for embedded elliptical cracks in a round bar subjected to tensile load. The stress-intensity factors (SIF) are presented in a tabulated form and were obtained from three-dimensional finite-element analyses. The SIF solutions are provided as a function of three dimensionless parameters that include the crack size, the crack aspect ratio, and its relative position in the cross section. After that, a sequential methodology for fatigue crack growth simulation is presented, and a comparison with experimental results of fatigue crack propagation initiated from internal defects in round bars is also presented. Finally, by varying the initial crack position and the initial crack aspect ratio, several aspects related to the evolution of the fatigue crack shape in this geometry are analyzed. The authors gratefully acknowledge financial support from the Junta de Castilla y Leon (Spain) through grant BU-002-P20, co-financed by FEDER funds. application/pdf eng Elsevier Procedia Structural Integrity. 2022, V. 39, p. 148-156 https://doi.org/10.1016/j.prostr.2022.03.083 info:eu-repo/grantAgreement/Junta de Castilla y León//BU-002-P20//Optimización de las técnicas de post-procesado para la mejora de propiedades mecánicas y de fatiga en componentes realizados mediante fabricación aditiva/ Attribution-NonCommercial-NoDerivatives 4.0 Internacional Attribution-NonCommercial-NoDerivatives 4.0 Internacional http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess Embedded cracks Fish-eye Round bars Resistencia de materiales Ingeniería civil Strength of materials Civil engineering Stress-intensity factor solutions for the simulation of fish-eye fatigue crack growth in round bars subjected to tensile load info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Procedia Structural Integrity 39 148 156