2026-05-07T11:49:25Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/84962024-01-27T01:05:27Zcom_10259_6214com_10259_5086com_10259_2604col_10259_6215

Calaf Chica, José Bravo Díez, Pedro Miguel Preciado Calzada, Mónica García Tárrago, María José 2020-06 The Small Punch Test (SPT) was developed as an alternative test to evaluate the mechanical properties of materials from a small material volume. Although the SPT is close to its standardization as a mechanical testing method, there are many methodologies for the estimation of the different mechanical properties. All of them are based on the use of a correlation equation to link the SPT and the estimated mechanical property. The scattering of these correlation methods is generally great enough to make it necessary to delve deeper into the understanding of the physical behavior of the SPT. This investigation was based on previous numerical studies related with the multi-dependency with more than one mechanical property of the correlation methods for the yield strength estimation. Specifically, an optimization of the t/10 offset correlation method was designed introducing the minimum slope Slopemin of the zone III of the SPT curve in the correlation equation. This optimized t/10 offset method showed a significant reduction of the scattering between its regression surface and the material data. After completing this numerical analysis, experimental tests (tensile and SPT tests) were performed to validate the new method. application/pdf http://hdl.handle.net/10259/8496 eng Elsevier Optimization of the t/10 offset correlation method to obtain the yield strength with the Small Punch Test info:eu-repo/semantics/article TEXT RIUBU. Repositorio Institucional de la Universidad de Burgos Hispana