2026-05-11T13:08:35Zhttps://riubu.ubu.es/oai/request

oai:riubu.ubu.es:10259/88632024-04-12T11:34:00Zcom_10259_4201com_10259_5086com_10259_2604col_10259_4505col_10259_4202

Peral, Luis Borja Díaz Portugal, Andrés Ebrahimzadeh, P. Fernández-Pariente, I. Alegre Calderón, Jesús Manuel Cuesta Segura, Isidoro Iván 2024-03-21T13:35:35Z 2024-03-21T13:35:35Z 2024 2452-3216 http://hdl.handle.net/10259/8863 10.1016/j.prostr.2024.01.007 Selective laser melting (SLM) is one of the common methods of additive manufacturing and it can be employed to customize components with complex geometry expected to work in hydrogen atmospheres. However, more studies are still needed to characterize the behavior of printed mechanical components intended to work in contact with hydrogen. In this study, smooth and notched tensile samples were precharged in an acid solution with 8 mA/cm2 for 24h time. Hydrogen damage was more marked in the notched samples, especially at 0.005 mm/min, where fracture micromechanism changed from ductile in the absence of hydrogen to quasi-brittle in the presence of internal hydrogen. The role of the strain-induced martensite is also highlighted. eng http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess Attribution-NonCommercial-NoDerivatives 4.0 Internacional 316L SLM Tensile Hydrogen embrittlement Strain-induced martensite Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting info:eu-repo/semantics/conferenceObject info:eu-repo/semantics/article