RT info:eu-repo/semantics/article T1 Fiber-reinforcement and its effects on the mechanical properties of high-workability concretes manufactured with slag as aggregate and binder A1 Ortega López, Vanesa A1 García Llona, Aratz A1 Revilla Cuesta, Víctor A1 Santamaría, Amaia A1 San José Lombera, José Tomás K1 Slag Aggregate and binder K1 Fiber-reinforced high-workability concrete K1 Fracture toughness K1 Dog-bone test K1 Stress-strain behavior K1 Ingeniería civil K1 Civil engineering K1 Materiales de construcción K1 Building materials K1 Ensayos (Tecnología) K1 Testing AB The feasibility of manufacturing fiber-reinforced concretes of high workability through additions of high volumes of electric arc furnace steel slag is evaluated in this paper, using sustainable binders with ground granulated blast furnace slag and ladle furnace slag as a supplementary cementitious material. An extensive experimental plan is developed to test four (self-compacting and pumpable) concrete mixtures, some reinforced with 0.5% vol. of (metallic or synthetic) fibers, in both the fresh and the hardened state. Very specific mechanical aspects are examined, such as the evaluation of both longitudinal and transversal stress-strain compressive behavior, and the assessment of direct tensile strength through the “dog-bone” test. The results of testing this sustainable concrete design yielded suitable mechanical strengths, and good toughness, ductility and impact strength, among other properties. Good adhesion between the fibers and the cementitious matrix was also evident from the fiber pull-out test results. Finally, the overall results confirmed that the use of electric arc furnace steel slag can make a real contribution to construction-sector sustainability and that the mechanical behavior of these novel concretes meets the basic design requirements for use in real structures. PB Elsevier SN 2352-7102 YR 2021 FD 2021-11 LK http://hdl.handle.net/10259/6200 UL http://hdl.handle.net/10259/6200 LA eng NO Spanish Ministries MCI, AEI, EU and ERDF [RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the Basque Government research group [IT1314-19]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [Y135.GI] and the University of the Basque Country [PPGA20/26]. Likewise, our thanks to CHRYSO and HORMOR for supplying the materials used in this research. DS Repositorio Institucional de la Universidad de Burgos RD 28-mar-2024