Envíos recientes

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

Díaz Portugal, Andrés

; Cuesta Segura, Isidoro Iván

; Martínez Pañeda, Emilio; Alegre Calderón, Jesús Manuel

(2020-09, Elsevier)

Artículo

Mechanical behaviour of stamped aluminium alloy components by means of response surfaces

Cuesta Segura, Isidoro Iván

; Almaguer Zaldivar, Pavel Michel; Alegre Calderón, Jesús Manuel

(2019-06, MDPI)

Artículo

Analysis of the Influence of the thickness and the hole radius on the calibration coefficients in the hole-drilling method for the determination of non-uniform residual stresses

Alegre Calderón, Jesús Manuel

; Díaz Portugal, Andrés

; Cuesta Segura, Isidoro Iván

; Manso Villalaín, Juan Manuel

(2019-01, Springer)

Artículo

Cold Isostatic pressing to improve the mechanical performance of additively manufactured metallic components

Cuesta Segura, Isidoro Iván

; Martínez Pañeda, Emilio; Díaz Portugal, Andrés

; Alegre Calderón, Jesús Manuel

(2019-08, MDPI)

Artículo

The essential work of fracture parameters for 3D printed polymer sheets

Cuesta Segura, Isidoro Iván

; Martínez Pañeda, Emilio; Díaz Portugal, Andrés

; Alegre Calderón, Jesús Manuel

(2019-11, Elsevier)

Artículo

Pre-notched dog bone small punch specimens for the estimation of fracture properties

Cuesta Segura, Isidoro Iván

; Willig, A.; Díaz Portugal, Andrés

; Martínez Pañeda, Emilio; Alegre Calderón, Jesús Manuel

(2019-02, Elsevier)

Artículo

Strain-rate-dependent properties of short carbon fiber-reinforced acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

Verbeeten, Wilco M.H.

; Lorenzo Bañuelos, Miriam

; Saiz Ortiz, Rubén; González, Rodrigo

(2020, Emerald)

Artículo

Print velocity effects on strain-rate sensitivity of acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

Verbeeten, Wilco M.H.

; Arnold-Bik, Rob J.; Lorenzo Bañuelos, Miriam

(2021-01, MDPI)

Artículo

Molecular Dynamics Test of the Stress-Thermal Rule in Polyethylene and Polystyrene Entangled Melts

Nieto Simavilla, David

; Sgouros, Aristotelis P.; Vogiatzis, Georgios G.; Tzoumanekas, Christos; Georgilas, Vasilis; Verbeeten, Wilco M.H.

; Theodorou, Doros N.

(2020-02, American Chemical Society)

Artículo

Anisotropic rate-dependent mechanical behavior of Poly(Lactic Acid) processed by Material Extrusion Additive Manufacturing

Verbeeten, Wilco M.H.

; Lorenzo Bañuelos, Miriam

; Arribas Subiñas, Pablo José

(2020-01, Elsevier)

Artículo

Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing

Naranjo Lozada, Juan; Ahuett Garza, Horacio; Orta Castañón, Pedro; Verbeeten, Wilco M.H.

; Sáiz González, Daniel

(2019-03, Elsevier)

Artículo

Fabricación aditiva de polímeros ¿Adecuada para piezas estructurales?

Verbeeten, Wilco M.H.

(2019)

Contribución a congreso

A Combination of the eXtended Pom-Pom Model and the Stress-Thermal Rule to Predict Anisotropy in Thermal Conductivity in Non-Linear Polymeric Flows

Nieto Simavilla, David

; Verbeeten, Wilco M.H.

(2017)

Contribución a congreso

Ansiotropy in k and cp induced by deformation in polymers: experimental methods, current understanding and application to numerical methods

Nieto Simavilla, David

; Venerus, David C. .; Verbeeten, Wilco M.H.

(2018)

Contribución a congreso

Kinetics of irreversible adsorption: thermodynamics versus molecular mobility

Nieto Simavilla, David

; Huang, Weide .; Housmans, Caroline; Vandestrick, Philippe .; Ryckaerts, Jean-Paul .; Sferrazza, Michele .; Napolitano, Simone .

(2018)

Contribución a congreso

Predictions of anisotropic thermal transport in non-linear-non-isothermal polymeric flows

Nieto Simavilla, David

; Verbeeten, Wilco M.H.

; Venerus, David C. .; Schieber, Jay D. .; Theodorou, Doros N.

(2018)

Contribución a congreso

Deformation induced changes in the thermal properties of elastomers: experimental methods, current understanding and application to finite elements methods

Nieto Simavilla, David

; Venerus, David C. .; Verbeeten, Wilco M.H.

(2018)

Contribución a congreso

Anisotropic thermal transport in non-linear-non-isothermal polymeric flows

Nieto Simavilla, David

; Verbeeten, Wilco M.H.

(2018)

Contribución a congreso

Changes in the thermal properties of polymeric materials induced by molecular orientation: Experimental methods, current understanding and strategies for the application to numerical methods

Nieto Simavilla, David

(2018)

Contribución a congreso

A new prediction method for the ultimate tensile strength of steel alloys with small punch test

Calaf Chica, José

; Bravo Díez, Pedro Miguel

; Preciado Calzada, Mónica

(2018-09, MDPI)

Artículo

Integridad estructural (GIE): Envíos recientes

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals ﻿

Mechanical behaviour of stamped aluminium alloy components by means of response surfaces ﻿

Analysis of the Influence of the thickness and the hole radius on the calibration coefficients in the hole-drilling method for the determination of non-uniform residual stresses ﻿

Cold Isostatic pressing to improve the mechanical performance of additively manufactured metallic components ﻿

The essential work of fracture parameters for 3D printed polymer sheets ﻿

Pre-notched dog bone small punch specimens for the estimation of fracture properties ﻿

Strain-rate-dependent properties of short carbon fiber-reinforced acrylonitrile-butadiene-styrene using material extrusion additive manufacturing ﻿

Print velocity effects on strain-rate sensitivity of acrylonitrile-butadiene-styrene using material extrusion additive manufacturing ﻿

Molecular Dynamics Test of the Stress-Thermal Rule in Polyethylene and Polystyrene Entangled Melts ﻿

Anisotropic rate-dependent mechanical behavior of Poly(Lactic Acid) processed by Material Extrusion Additive Manufacturing ﻿

Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing ﻿

Fabricación aditiva de polímeros ¿Adecuada para piezas estructurales? ﻿

A Combination of the eXtended Pom-Pom Model and the Stress-Thermal Rule to Predict Anisotropy in Thermal Conductivity in Non-Linear Polymeric Flows ﻿

Ansiotropy in k and cp induced by deformation in polymers: experimental methods, current understanding and application to numerical methods ﻿

Kinetics of irreversible adsorption: thermodynamics versus molecular mobility ﻿

Predictions of anisotropic thermal transport in non-linear-non-isothermal polymeric flows ﻿

Deformation induced changes in the thermal properties of elastomers: experimental methods, current understanding and application to finite elements methods ﻿

Anisotropic thermal transport in non-linear-non-isothermal polymeric flows ﻿

Changes in the thermal properties of polymeric materials induced by molecular orientation: Experimental methods, current understanding and strategies for the application to numerical methods ﻿

A new prediction method for the ultimate tensile strength of steel alloys with small punch test ﻿

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

Mechanical behaviour of stamped aluminium alloy components by means of response surfaces

Analysis of the Influence of the thickness and the hole radius on the calibration coefficients in the hole-drilling method for the determination of non-uniform residual stresses

Cold Isostatic pressing to improve the mechanical performance of additively manufactured metallic components

The essential work of fracture parameters for 3D printed polymer sheets

Pre-notched dog bone small punch specimens for the estimation of fracture properties

Strain-rate-dependent properties of short carbon fiber-reinforced acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

Print velocity effects on strain-rate sensitivity of acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

Molecular Dynamics Test of the Stress-Thermal Rule in Polyethylene and Polystyrene Entangled Melts

Anisotropic rate-dependent mechanical behavior of Poly(Lactic Acid) processed by Material Extrusion Additive Manufacturing

Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing

Fabricación aditiva de polímeros ¿Adecuada para piezas estructurales?

A Combination of the eXtended Pom-Pom Model and the Stress-Thermal Rule to Predict Anisotropy in Thermal Conductivity in Non-Linear Polymeric Flows

Ansiotropy in k and cp induced by deformation in polymers: experimental methods, current understanding and application to numerical methods

Kinetics of irreversible adsorption: thermodynamics versus molecular mobility

Predictions of anisotropic thermal transport in non-linear-non-isothermal polymeric flows

Deformation induced changes in the thermal properties of elastomers: experimental methods, current understanding and application to finite elements methods

Anisotropic thermal transport in non-linear-non-isothermal polymeric flows

Changes in the thermal properties of polymeric materials induced by molecular orientation: Experimental methods, current understanding and strategies for the application to numerical methods

A new prediction method for the ultimate tensile strength of steel alloys with small punch test