Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10259/5335
Título
Effect of chloride and pH on the electrochemical surface oxidation enhanced Raman scattering
Autor
Publicado en
Applied Surface Science. 2019, V. 473, p. 366-372
Editorial
Elsevier
Fecha de publicación
2019-04
ISSN
0169-4332
DOI
10.1016/j.apsusc.2018.12.148
Abstract
In the present work, electrochemical surface oxidation enhanced Raman scattering (EC-SOERS) was studied using time resolved Raman spectroelectrochemistry. This multiresponse technique allows us to obtain dynamic information about the processes taking place during the electrochemical oxidation of a silver substrate. EC-SOERS is particularly found in specific electrolytic conditions, namely, HClO4 0.1 M + KCl 5·10−3 M, and has a clear dependence on chloride concentration and pH, being the optimum values between 5·10−3 M and 1·10−2 M for chloride and pH = 1. In light of the results of this study, the appearance of the phenomenon is related to the modification of the electrode surface, yielding Ag/AgCl cubes as plasmonic structures, and the stability of such structures at low pH values. The results presented in this work could shed more light into the intricate EC-SOERS phenomenon which can be summarized as the increase of the Raman signal for a Raman probe molecule exclusively during the electrochemical oxidation of silver electrodes.
Palabras clave
Silver
Spectroelectrochemistry
Raman enhancement
Nanostructures
Materia
Química analítica
Chemistry, Analytic
Versión del editor
Aparece en las colecciones
Documento(s) sujeto(s) a una licencia Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internacional