Envíos recientes

(2022-03, Elsevier)

Artículo

Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting

; García, Ricardo; Peral, Luis Borja; Cuesta Segura, Isidoro Iván

(2022-10, Elsevier)

Artículo

Closed-form equations for the calculation of stress intensity factors for embedded cracks in round bars subjected to tensile load

(2022-10, Elsevier)

Artículo

SPT analysis of hydrogen embrittlement in CrMoV welds

Álvarez, G.; Zafra, A.; Rodríguez, C.; Belzunce, J.; Cuesta Segura, Isidoro Iván

(2020-12, Elsevier)

Artículo

Modelling hydrogenation during cold dwell fatigue of additively manufactured titanium alloys

(2021-10, Elsevier)

Artículo

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

; Martínez Pañeda, Emilio; Alegre Calderón, Jesús Manuel

(2020-05, Springer Nature)

Artículo

Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

Peral, Luis Borja; Díaz Portugal, Andrés

; Arniella, V.; Belzunce, J.; Alegre Calderón, Jesús Manuel

; Lorenzo Bañuelos, Miriam

(2022-10, Elsevier)

Artículo

Material Extrusion Additive Manufacturing of Poly(Lactic Acid): Influence of infill orientation angle

Verbeeten, Wilco M.H.

(2022-11, Elsevier)

Artículo

Hydrostatic pressure dependence in tensile and compressive behavior of an acrylonitrile–butadiene–styrene copolymer

Verbeeten, Wilco M.H.

; Sánchez‐Soto, Miguel; Maspoch, Maria Lluisa

(2022-02, Wiley)

Artículo

Stress-intensity factor solutions for embedded elliptical cracks in round bars subjected to tensile load

(2022-02, Elsevier)

Artículo

Residual stresses in cold-formed steel members: review of measurement methods and numerical modelling

; Jesus, A.M.P. de; Manso Villalaín, Juan Manuel

(2021-02, Elsevier)

Artículo

Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint

; Rodríguez, C.; Alegre Calderón, Jesús Manuel

(2021-04, Elsevier)

Artículo

Numerical study of hydrogen influence on void growth at low triaxialities considering transient effects

; Zhang, Zhiliang

(2019-12, Elsevier)

Artículo

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

; Zafra, A.; Martínez Pañeda, Emilio; Alegre Calderón, Jesús Manuel

; Belzunce, J.; Cuesta Segura, Isidoro Iván

(2020-12, Elsevier)

Artículo

Generalised boundary conditions for hydrogen transport at crack tips

Martínez Pañeda, Emilio; Díaz Portugal, Andrés

; Wright, Louise; Turnbull, Alan

(2020-08, Elsevier)

Artículo

Damage modeling in Small Punch Test specimens

Martínez Pañeda, Emilio; Cuesta Segura, Isidoro Iván

; Peñuelas, I.; Díaz Portugal, Andrés

(2016-12, Elsevier)

Artículo

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

; Martínez Pañeda, Emilio; Alegre Calderón, Jesús Manuel

(2020-09, Elsevier)

Artículo

Mechanical behaviour of stamped aluminium alloy components by means of response surfaces

Cuesta Segura, Isidoro Iván

; Almaguer Zaldivar, Pavel Michel; Alegre Calderón, Jesús Manuel

(2019-06, MDPI)

Artículo

Analysis of the Influence of the thickness and the hole radius on the calibration coefficients in the hole-drilling method for the determination of non-uniform residual stresses

; Manso Villalaín, Juan Manuel

(2019-01, Springer)

Artículo

Cold Isostatic pressing to improve the mechanical performance of additively manufactured metallic components

Cuesta Segura, Isidoro Iván

; Martínez Pañeda, Emilio; Díaz Portugal, Andrés